ICM 870-32A Soft Starter 32A

SKU: ICM 870-32A
Write a Review

On Backorder - Select Generac Model 8008

Essential Accessories

Click ‘Add to Cart’ to place in cart



32A Soft Start

The ICM870 Soft Start is intended for residential, commercial, RV & marine applications. The ICM870 integrates compressor or motor in-rush current over startup time, thus reducing peak current demand on a power supply source by up to 70%.

Effectively reducing power draw to the A/C, the ICM870 utilizes a built-in self learning algorithm to deliver the optimal in-rush current per application. The ICM870 will monitor system health including voltage, current, compressor startup and integrity. Upon a fault condition, it will halt operation and initiate a 3 minute anti-short cycle routine while providing diagnostic fault information by means of an LED indicator.

*New feature: Upon initial installation, the ICM870 soft start will initiate a routine 4-minute start delay indicated by a rapid flashing “Red” LED indicator light. Power on the A/C unit and wait 4-minutes for the delay routine to conclude. This should follow with a successful call from the thermostat, A/C startup and the LED indicator light to change from “Red” to “Green”.


Semiconductor soft-start motor controller, Form 2, bypassed controller

• SCCR: 5kA   • Ue = 240 VAC

• Ui = 240 VAC   • Uimp = 4kv

• Pollution degree 3

• UL 60947-1 and UL 60947-4-2

• CSA C22.2 NO. 60947-1 and CSA C22.2 NO. 60947-4-2



(L1, L2) – 100-240 VAC 50/60Hz

• Over voltage limits: 115 VAC nominal = 140 VAC 240 VAC nominal = 250 VAC 

• Under voltage limits: 115 VAC nominal = 95 VAC, 240 VAC nominal =195 VAC




• Solid state/relay

• Current: Max. nominal = 32A

• Over current limits: ICM870-32A = 40A



• Ambient temperature: 40°C @ 32 FLA, 8 hour duty

• Storage temperature: -40°F to 149°F (-40°C to 65°C)

• Humidity: 0-95% non-condensing

• Enclosure: IP65

• Dimensions: 7.94” x 4.20” x 2.10”

• Screw Hole Center Points: 7.36” x 2.97”



7.94” x 4.20” x 2.10”

Essential Accessories

Click ‘Add to Cart’ to place in cart