Kohler RXT-JFNC-400ASE-QS3, 400A, 120/240V, SE, 1ph, 2 pole, Nema 3R, UL Listed Automatic Transfer Switch

Kohler RXT Spec Sheet

RXT-JFNC-400ASE, 120/240V, Service Entrance Rated, 1ph, 2 pole, Nema 3R, UL Listed with a Five-Year Limited Warranty 

The transfer switch is the brain of your KOHLER home backup power system. It continuously monitors the utility power for an interruption. If utility power fails, the transfer switch automatically starts the power system, transfers the electrical loads and restores power to your home. When utility power resumes, the transfer switch reverses the process again, automatically.

The Model RXT automatic transfer switch is designed for use only with Kohler generator sets equipped with RDC2 or DC2 generator set/transfer switch controls. The transfer switch operation is controlled by the RDC2/DC2 controller.

STANDARD FEATURES

• Allows utility voltage display on the RDC2/DC2 generator set/transfer switch controller, available exclusively on Kohlerr residential and light commercial generator sets
• UL listed
• Models with load centers, UL 67 listed, file #E251086
• Models without load centers, UL 1008 listed, file #E58962
• CSA certification, file #LR58301, is available for:
• Standard ATS without load center (single and three-phase)
• Service entrance ATS 100, 150, and 200 amp models
• Corrosion-resistant NEMA 3R aluminum enclosure
• Padlock Capable
• Approved for indoor or outdoor installation
• ANSI 49 gray
• NEMA 1 enclosure available on 100 amp load center models
• Contactor electrically and mechanically interlocked
• Double throw inherently interlocked design
• Contactor manually operable for maintenance purposes
• Silver alloy main contacts
• Transfer switches are 100% equipment rated and can be applied at the rated current without derating (non-service entrance models)
• Service entrance models include disconnect circuit breaker on the utility (normal) source side (80% rated)
• Five-year limited warranty