Kohler GM84662-KP2 RXT Status Indicator Kit (RXT Transfer Switch)

GM84662-KP2-QS 

Applicable Models:

RXT Automatic Transfer Switch (NO Load Center Switches) 

Description:

• The status/load indicator assembly provides an LED display that indicates whether the power source is utility or generator, and displays the loads being powered and the loads being shed.
• The indicator panel mounts on the outside of the transfer switch for clear visibility, and is protected by an overhang on the enclosure.
• The kit can be used on transfer switches installed both indoors and outdoors.
• Applicable Models: RXT Transfer Switch

*Source Available: Utility power (normal)  Generator (emergency)

Transfer Switch Position: 

Utility (utility power supplying the load)  Generator (Standby generator supplying load) 

Six Load Status Indicators (GM84662--KP2--QS only): FOR RXT ATS MODELS THAT HAVE NO LOAD CENTERS WITH LOAD SHED BOARDS ONLY)

Both the GM84662--KP1--QS and GM84662--KP2--QS status indicator kits are designed only for the Kohler Model RXT
automatic transfer switch. The kits will not connect to or operate with any other automatic transfer switch (ATS). The
Model RXT transfer switch must be connected to a Kohler generator set equipped with the RDC2 controller for
proper indicator LED operation.

GM84662--KP2--QS is designed only for use with a combined interface/load management board.

The indicator panel mounts on the outside of the transfer switch for clear visibility. The status indicator kits can be used
on transfer switches installed indoors or outdoors. An overhang on the enclosure protects the indicator panel and ribbon
cable opening

KIT COMPONENTS SUBJECT TO CHANGE - DO NOT RELY ON THE PHOTO - VERIFY PART NUMBERS